Stress-Free Home

An improvement in aesthetic quality can have positive effects on your mind.

Archive March 14, 2022

Importance Of Wood-Polymer Composite (WPC) Presence In The Fence

WPC is a very popular modern material that is actively used in street buildings. It is completely devoid of the shortcomings of natural wood, which brought him popularity. It is used to make wooden railings for stairs, railings for flower beds, and floor coverings for outdoor outbuildings.

WPC was created as a finishing and structural material for street buildings. It consists of recycled wood and harmless polymer inclusions. This mixture is processed in several stages, subjected to pressure and high-temperature treatment. This method allows the production of material of the highest strength.

Another advantage of WPC is creating fences of any shape and size. Thanks to modern dyes, it is possible to obtain a material of any color that imitates all known types of wood.

Recently, WPC appeared on the domestic market but has already found great popularity among craftsmen. In our country, there is an extensive production of such high-quality materials. In WPC production, industrial wood waste is processed, obtaining high-quality flour. Then it is mixed with composites and processed.

Thanks to this technology, you can purchase an inexpensive material that imitates expensive wood. The surface of WPC products is ideally smooth, so the installation of terrace and stair railings can be done by hand.

To increase the strength of the material, the fence boards are coated with a special varnish. It protects the composite from the effects of bad weather and also adds shine to decorative products. The material does not release harmful chemicals into the environment when exposed to sunlight. It makes excellent fences for flower beds.

Installation of a wooden fence is carried out in several stages:

  • Cleaning the base and marking for the installation of poles.
  • Drill holes for the bolts according to the marked places.
  • Installation of supporting pillars.
  • Installation of railings. For them, processed timber is usually used with a square section.
  • The lower part of the railing must be closed with a decorative mesh. You can also use wooden bars. If desired, you can make a fence of metal and wood. However, it is necessary to strengthen the foundation in advance in this case.
  • Equipping the pillars with side elements.
  • After the fence is completed, all metal parts should be coated with an anti-corrosion compound.

WPC are modular products. This means that you can build various fences with your own hands. During operation, you can combine different profiles. It is worth considering that WPC fences will last much longer than ordinary wooden fences. The material is not subject to decay and is not destroyed by insects.

The only thing that can stop when buying WPC to create fences is its high price. However, the color palette and the choice of textures and shapes are quite wide. This will allow you to choose an option to your taste.

Fencing companies in Austin are a dime-a-dozen. Which one do you think is the best? We have been installing fences and gate installations around town since we opened up shop back since our inception, so if it’s quality that matters, then look no further because we’re here for you!

How To Install A Composite Fence?

Installing a composite fence is within your reach if you are a good handyman armed with patience: Once the inserts have been sealed and the posts have been bolted, the composite fences are installed by a system of stacking and interlocking the filling boards. Find the procedure for installing fences step by step.

Sealing of inserts

Fence next to Path on Mountain by SeaWith composite wood and aluminum garden fences, 3 options are available to you:

  • Installation of a small height (fence up to 1.20 m) on a low wall >> Insert to seal chemically
  • Installation of a great height on the ground ( fence of 1.40 m to 1.80 m) >> Insert to seal in the concrete
  • Installation of a non-standard height (> 1.80 m) >> Sealing of fence posts in concrete

Note: whatever the height of your wood composite fence panels, the inserts are always to be sealed; the brand does not offer screw-on plates. Indeed, all of the wood composite fencing systems comply with DTU NV65 – Snow & Wind climatic actions.

The fixing system chosen is therefore sufficiently qualitative and robust to comply with the weight of the panels, their resistance over time, and the wind resistance of each region in accordance with DTU NV 65.

  1. a For installation on a low wall (inserts to be chemically sealed)

Laying a composite wood palisade on a low wall is the simplest and fastest of the 3 types of installation. It indeed requires drilling 2 holes of diameter 16 in the concrete drill for each insert that you are going to install. Once the holes have been made, all you have to do is fill the holes with chemical sealing and slide the inserts in until the end.

NB: remember to clean up excess glue and check the plumpness of your inserts.

  1. b For laying a composite fence on the ground (sealing the inserts in the concrete)

A composite fence higher than 1.20 m will require concrete sealing of the steel inserts. To do this, dig a hole of 40 x 40 x 40 cm at each post location. Seal an insert there, checking that it is perfectly plumb (use wedges to keep it in place while it dries).

  1. c For installing a non-standard fence (sealing the posts in concrete)

The installation of non-standard posts is done by sealing the posts directly in the concrete.

Fixing the posts

Once the inserts are sealed in the ground or on a low wall and their seal is dry, they will need to be drilled in order to securely bolt each post on them. Remember to remove the drilling dust so that it does not stagnate under the post once it is installed.

Implementation of composite blades

Each panel must have at least three reinforced composite slats (steel reinforcement slipped into the slats): The first slat, the last slat, and the one in the middle (up to 4 reinforced composite wood slats per panel for great heights).

To fill the panels, slide the first tab strip upwards to the ground / low wall, then apply a bead of PVC glue along the groove of the next strip. Slide and fit this one on the blade below. Repeat to the top of your panel, then clip the finishing rebate and glue the end caps to the top of each post.

Implementation of decorative blades

If you choose to install a decorative strip on your composite wood fence, apply a bead of MS 55 glue in the lower groove of the aluminum frame, then fit the decorative aluminum strip. Continue laying the composite slats by reversing their direction (tab down) so that the frame is properly fitted between 2 slats.

For installing post decorations

Aluminum post decorations are particularly easy to apply: they are fitted with an ultra-resistant adhesive specially designed for outdoor use. All you have to do is degrease the surface of your post intended to receive the decoration (using the wipe provided), then affix the decorative accessory by pressing firmly in the right place.

Cut a composite board and its reinforcement.

Composite blades are cut in the same way as wood. Only steel reinforcements require a blade suitable for this material.

Contact True Built Fencing, a fence contractor in Austin TX, and let professionals build your perfect fence.

Company Name
True Built Fencing
Phone
+1 (512) 354 1601
Address
2025 Guadalupe Street, Suite 250
City
Austin
State
TX
Postal Code
78705
Country
United States
Website
https://truebuiltfencing.com/
Google my Business Website
https://true-built-fencing-austin.business.site/
Google Site
https://sites.google.com/view/true-built-fencing-austin/